Madera_Otirra
Published
The game leaves a little on the right side of the screen
Dualshock 4 doesn't work, when i press some buttons she starts slowly walking without stopping, or she turns to the right
Failed to start the game. Cannot find essential information in the registry.
Runs out of the box
Runs below 30fps probably due to poor optimization
Dummy file. This is not the .exe you are looking for
Immediately crashes at launch
After a couple years the game still doesn't launch, not even with Proton GE or experimental
Runs better than native
Micro stutters
The screen is all green and blue, then turns black and doesn't start
Runs Great
Cutscenes don't render, they display an RGB scale instead
I was experimenting with other proton versions, the game hanged in the cutscene before the fight with Magus, i lost my progress completely.
Occasional stutters while running around
Playable despite occasionally glitching or crashing
The game occasionally presents a variety of graphical glitches, the ones i experienced are described below:
- Cutscenes display an RBG scale instead of rendering normally
- Textures go black
- UI elements turn transparent
- UI elements show up where they shouldn't
- Character sprites disappear
Occasional stutters while running around
- May occasionally crash
- May hang during cutscenes
- May crash when the game is presenting graphical glitches or during scripted events
Runs great
The game suffers from screen tearing due to not having V-sync, at least the version I'm running which is a beta doesn't.
Occasional micro stutters.
Runs great
Intro cutscene displays an RGB scale.
Controls seem to have a slight delay.
5.9-GE-8-ST GloriousEggroll
The game stutters terribly
Dsfix doesn't work, performance is much worse than on Windows, the game runs below 30 fps and stutters terribly
PROTON_USE_WINDED3D=1 %command%
Character face looks blurry
The game stutters randomly, the stutters seem to diminish with time
Follow these steps to override dinput8 to make dsfix work
- Open a terminal
- Run the command: protontricks --gui
- Open winecfg
- In libraries tab add dinput8 as native the built-in
Title screen shows an RGB scale for a while then the title renders correctly
The game presented the following performance issues
- Stuttering and frame drops, diminishes over time
- The first cutscene suffers from a massive fram drop reaching far below 10fps
Dsfix does not work despite performing the dll override
Black Screen
The game used to work great a few years ago, it no longer works, the game gets stuck in a black screen after launching, i doesn't work even with GE or experimental Proton.
Works great
The game displays vertical silver lines, either when i skip a cutscene, or when the loading icon disappears
The normal game works perfectly, the bundle edition for some reason gets stuck in a black screen after launching.
Runs like native
If i leave the game still for a few minutes it's display goes black, alt-tabbing out of the game then back in fixes it.
Unplayable
The game either crashes at startup or when starting a new game.
Runs out of the box
Lights produce a light ray across the screen, doesn't affect gameplay though
UPDATE
I were running the game with Proton GE 5.9 which caused the light sources to project a light ray across the screen, this doesn't happen with Proton 5.13-4
Borked
Missing models for characters and enemies
5.21-GE-1 GloriousEggroll
Game doesn't run smoothly despite the fps being slightly over 30, the framerate should be much higher than 30 for my specs, the frames drop occasionally
Poor performance
Stuttering and slow downs
The game still suffers from slow downs and stuttering after an year
Poor performance
The game runs around 30fps on lowest quality despite my laptop far surpassing the recommended requirements, i'm not sure it's a problem with Proton or if the game is poorly optimized.
The game crashes when changing resolution or window mode
Works fine
At first launch the window flickers and moves around like crazy as if it's Alt tabbing by itself, i needed to keep Alt tabbing out of the game till it was displayed correctly, then going into settings and changing resolution and window mode.
Dualshock 4 doesn't work
Runs poorly
The game runs poorly because it doesn't allow me to disable MSAA which is taxing on the GPU
Launcher shows "Install" instead of "Play", options and data files are greyed out
Launcher's "Play" button is replaced by "Install"
The game just won't run, keeps implying it is not installed and asks to run setup.exe from DVD
Runs great after fixing the install bug
The game occasionally suffers severe frame drops during gunfghts, mainly when there are many characters firing simultaneously
- NPCs, enemies, and animals walking and running animations don't work
- NPCs occasionally keep rotating their head
- The launcher doesn't recognize the game is installed displaying an error: Fallout: New Vegas does not appear to be installed and the installer could not be found
To fix the install bug you must set the game's install path by following those instructions:
- Open a terminal and run protontricks --gui
- Select default prefix then browse files
- Open system.reg in a text editor then add the following to the last line: [Software\Wow6432Node\Bethesda Softworks\FalloutNV] 1627669000
#time=1d7856f0ad32d72 "Installed Path"="C:\Program Files (x86)\Steam\steamapps\common\Fallout New Vegas"
- If your game is non Steam then change the install path accordingly
- Run the launcher, if the error persists then run the game's executable directly
Background music is missing
- DirectX 11 doesn't work
- Textures look blank under DirectX 11
When using custom graphics settings the lighting and shadows might get artifacts, use presets instead
When using Steam's Proton the title doesn't render and the game gets stuck on title screen, Proton GE works properly
- When using custom graphics settings the lighting and shadows might get artifacts
- Sniper rifle reticle doesn't show
- Omega shields don't render
Occasionally drops frames
- When using Steam's Proton the title doesn't render and the game gets stuck on title screen, Proton GE works properly
- Blood Dragon lasers passes through omega shields while activated
Some objects such as buildings or rocks project a black square around them which can be seen through other objects
Sometimes when trying to change resolution the game's window becomes completely transparent showing the desktop
The game once crashed when i failed the prologue at the tower
Runs out of the box
The game performs poorly due to my specs, and unfortunately the game doesn't support resolutions below 720p
Runs better than native
Occasionally crashes during loading screen or room transitions
Playable with minor issues
Audio crackles when braking the car
High sfx quality messes up road textures
The game stutters slightly despite fps being much higher than 60
Crashes occasionally during loading screen and room transitions
Runs like native
The recent Proton versions improved the game a lot, the game no longer crashes during transitions, there are no more graphical glitches, no sound crackling and such, the game at the moment is running like native with Proton 7.0
Crashes randomly
The game often crashes randomly in few minutes of gameplay
The 64 bit executable doesn't start up at all
Borked
The main menu's background is black, and the menus aren't rendered properly, they look just like rectangles without font and texture, therefore the game is broken
Runs great
Stuttering during Aquiris screen, and during loading screen, the game does not stutter in menus or during gameplay.
Runs great
Main menu background is empty
Occasionally stutters
Runs better than native
At first the game was stuttering a lot, but it gradually decreased over time
The game displays keyboard buttons while using a controller
Doesn't launch
Unable to create isteam user error at launch
Unplayable
Poor performance (Probably due to poor optimization from Cyber Connect)
5.21-GE-1 GloriousEggroll
The fps dropped below 10 during the elevator explosion scene
Unplayable
The boss faces in the selection screen flicker displaying horizontal lines
After changing to fullscreen and closing the game it gets stuck in a black screen
Slow motion
The game lags and runs in slow motion, mostly because it's a terrible port, poorly optimized.
Game gets stuck in a black screen
I have tried multiple Proton versions, Proton GE and Lutris, all of them have the same issue:
After the very first screen with the car brand logos the game goes into a black screen and gets stuck, mouse doesn't work, keyboard doesn't work, gamepad doesn't work, nothing works, sometimes when i press some random key i can hear a sound as if it was some kind of confirmation or menu input but the screen remains black.
Just works out of the box, performance is better than native Windows 10, constant 60fps at high.
The sound crackles under high volumes.
The cars use the N20 by themselves without player input only in challenge series mode.
Proton-5.21-GE-1 GloriousEggroll
Sound crackles randomly
Cars use N20 by themselves in challenge series without player input
Game randomly stutters despite running at constant 60fps
Game occasionally hard hangs, can't kill game, wine or Steam processes from tty forcing me to reboot
If the game hard hangs reboot from tty:
CTRL + ALT +F2 systemctl reboot
Runs out of the box
Sound crackles under high volumes
Sometimes the vehicle uses the nitrous by itself
Occasionally hangs or crashes but not very often
The performance issues were caused by tlp powersched which limits the number of cpu cores used under light loads disabling it fixes the slow downs, the version of the game that i've tested is the original one from 2005 not the 2012 remake
Runs better than native
Occasionally drops a few frames
The graphics ocasionally flicker and textures duplicate depending on camera angle
The game stutters a bit sometimes, it seems to diminish as time goes
Needed to use a patch to fix slow motion
Cutscenes are out of sync, locking the framerate to 30 fixed it for me
The game runs in slow motion due to internal resolution being forced to 1920x1440, the game needs a patch to fix slow motion.
- Browse to https://www.pcgamingwiki.com/wiki/Resident_Evil_HD_Remaster#Poor_performance_or_slowdowns
- Download the slow down fix
- Extract and copy the files to the game's main folder overwriting existing files
- Open rehd_resfix.ini with a text editor and set desired resolution
The first cutscen doesn't work, it displays an RGB scale and wmp can't be installed via protontricks
Ultimate HD Edition crashes at launch
The Ultimate HD Edition immediately crashes at launch, Proton GE and Lutris present the same issue, the game just crashes before the first logo even shows up on the screen.
Haven't tested the old port from Ubisoft.
Sound is muffled
The game presents a slight slowness which can be fixed with those launch options: PROTON_USE_D9VK=1 PROTON_NO_ESYNC=1 %command%
While running Leon sometimes stutters for a moment
The game only worked with Proton 4.2-9 Proton 5.13-4 presents severe screen tearing, and the game displays colored crt lines during cutscenes and logo screens Proton GE 5.21 also presents screen tearing Proton GE 5.9 presents screen tearing and got stuck during the village embush before the shack cutscene
Black screen
The black screen persists even though i followed the instructions mentioned by other users, the game won't reach the title screen therefore it's borked
Open a terminal --> run protontricks --gui --> select Resident Evil 5 from your Steam library --> select default wine prefix --> install Windows dll or component --> check and install wmp11 (Windows Media Player 11)
Button mappings completely incorrect
The game crashes when i enable vsync
Works great
The game occasionally suffers from frame drops
Some cutscenes don't work, showing an RBG scale on the screen
I wasn't able to install wmp11 due to permission errors
The soundtrack is laggy
The controller was incorrectly configured, after configuring the controller neither i or my partner can shoot, if i hold L2 then press R2 to shoot it puts the gun down instead
The crackling can be fixed by setting PULSE_LATENCY_MSEC=150 %command% in launch options
The occasionally drops frames and stutters, it also freezes during cutscenes
The game works fine with minor issues that won't prevent you from playing
Crackling
- Frequent frame drops
- Frequent stuttering
Runs decently despite performance issues
- Occasional frame drops
- Occasional stutters
- Fire effects cause severe frame drops
Some cutscenes don't work, trying to install wmp11 fails with status 1
Unplayable, stuck at main menu
Logo screen is completely black (Sound plays normally though), neither mouse keyboard or controller input works in main menu
Crashes at launch
The game doesn't start at all, it instantly crashes at launch
Works out of the box
The game presents slowness when framerate is below 60 (Due to the framerate being set to constant instead of variable)
The game presents tearing that turns part of the screen black for a moment
Works great out of the box
Slows down when running under 60 fps, reducing resolution and removing shadows solved it.
Black Screen
- Open a terminal and run protontricks --gui then select Oblivion
- Select default prefix then run regedit
- Navigate to HKEY_LOCAL_MACHINE/Software/Wow64Node
- Create a new key named "Bethesda Softworks" inside it another key named "Oblivion"
- Inside Oblivion create a string value named "Installed Path"
- Set the game's install path in the value (If your game is non Steam set the path accordingly)
- Now the launcher will work normally, if the game still won't run through the launcher then run the game's executable directly (Oblivion.exe)
The launcher doesn't recognize the game is installed, all options are greyed out
Game won't start
Data files and options are grayed and the launcher displays install instead of the play option.
6.20-GE-1 GloriousEggroll
The shadows flicker once in a while
The game performs slightly worse than on Windows but is completely playable
The DLCs don't work, data files is greyed out in the launcher
Needed to install xact to fix missing audio.
Voices and soundtrack are missing, it can be fixed by installing xact via protontricks.
- Open a terminal
- Run the following command: protontricks --gui
- Select Skyrim
- Select default prefix
- Install dll or component
- Install xact
After installing xact you will need to set the dll overrides.
- Open a terminal
- Run the following command: protontricks --gui
- Select default prefix
- Run winecfg
- Go to libraries tab
- Set xaudio2_06 and xaudio2_07 as native
- Close protontricks windows then start the game
Data Files is greyed out in the launcher.
6.20-GE-1 GloriousEggroll
Sound occasionally crackles, mainly when there are fire effects around
The game is still stable even though it's moderately modded, no bugs or glitches (Except those from the mods themselves if there are any), no crashes, it runs just fine
Faudio must be installed via Protontricks to fix mute NPCs.
- Open a terminal
- run protontricks --gui then select Skyrim Special Edition
- Install Faudio
NPCs are mute, can be fixed by installing Faudio
The frame rate is slighly lower than Windows
Faudio must be installed via Protontricks to fix mute NPCs.
- Open a terminal
- run protontricks --gui then select Skyrim Special Edition
- Install Faudio
Mute NPCs
Occasionally hangs my laptop requiring to Alt F4
Very low performance
Graphics settings won't apply
The game performs poorly, the graphics settings don't apply, whenever i change them nothing changes graphically, the game is plain unplayable
