
Pierre
Published
Works perfectly, like previous natives episodes
Works perfectly, like previous natives episodes
You have to force compatibility with Proton. Without this, the game doesn't start at all.
Black screen after 11bit logo
Native version don't work, black screen with Proton
Don't work
Crash with or without the launcher for me
Game don't start at all for me. I have tested tweaks but nothing seems to work.
I tried USE_WINED3D, NO_D3D11 and NO_ESYNC but the game don't start or crash immediately.
Runs perfectly after disabling D3d11 and Esync. Screen resolution problem at each start but alt+tab solves it. First manual save is very long but other saves are faster.
I tried USE_WINED3D, NO_D3D11 and NO_ESYNC but the game don't start or crash after bioshock 2 logo.
As someone suggested below, this tweak is the best for me too : "PROTON_NO_ESYNC=1 PROTON_USE_WINED3D=1 %command% -nointro". Performances aren't incredible but it's playable.
Works well
Just one time : a black texture on a carpet during a cutscene (not annoying at all)
Just finished the game with 360 controller without issues.
Works well out of the box, I just noticed small graphic glitch during cutscenes
"Alt+Enter" for windowed mode -> "Alt+F4" for kill the game. After this, the game is playable but only on a little window (800*600).
Seems to works well
Host a game and play with bots works well, haven't tried with another players.
Works but without sound
Sound is broken, fullscreen don't work
Works great on native but it's not the lastest build
The game works perfectly with linux native but I think the build isn't the lastest : the french translation isn't present for exemple.
With Proton the game also work (and the french translation is available) but 1920x1080 screen resolution isn't present...
Game works well
fullscreen don't work, I played in windowed mode
Typo problem with the french translation, some sentences are difficult to read because of weird characters. (I don't know if the problem is similar on Windows)
Just finished the game, works great.
WOrks well
f6 for better resolution and alt+enter for fullscreen (f5 don't work for me)
Runs perfectly after disabling d3d11 ( game don't start without this tweak)
Runs perfectly out of the box, played with two xbox360 controllers. Only problem : "alt+tab" bugs out everything and you have to force quit the game.
Game runs great. Only problems : the 3 buttons on the right of the menu and "alt+tab" bugs out everything.
Game starts on a fullscreen black screen, you have to alt+enter to change to windowed mode. After this, the game is displayed correctly.
"Insufficient video memory detected. A minimum of 32 MB of free video memory required."
Game don't start without PROTON_USE_WINED3D. After this tweak the game works perfectly.
Works well
I finished the game (all ingame success) without any problem
Works well
I don't find a solution for a correct full screen
I can confirm rare text display problems in some situations, not very annoying.
The game takes a long time to launch, after that the game works well. Played with all DLCs.
Works perfectly, no problem with xbox360 controller
Game start but unable to create a game
Intro video don't work, ingame menu work but it's not possible to start single player or multiplayer game : pop-up error and after that, you have to force quit the game.
Crash when click on play button
Tested with Proton and Proton-GE, same problem
Game works but crash very often : after 2-3 map there is a problem (graphics glitch or audio stop then game freeze or crash). I tried all tweaks but nothing help.
Don't start without PROTON_NO_D3D11. Having problems with the mouse : small amplitude movements don't seem recognized in game which makes the game unplayable.
Native version don't works
Native version don't works. With Proton :
- Jagged aliance 2 Wildfire don't works (cd key problem)
- Jagged Aliance 2 Classic works well.
I confirm that the previous tips work well : "cd ~/.steam/steam/steamapps/common/Jet\ Set\ Radio/ && rm jsrsetup.exe && mv jetsetradio.exe jsrsetup.exe" at first start and alt+f4 for quit.
Proton-6.13-GE-1 GloriousEggroll
Proton-6.13-GE-1
For me, the native version doesn’t work at all. Proton works but after 5 minutes of gameplay the game bugs (the “car accident” cinematic doesn’t start). With Proton-GE everything works fine, I finished the game without any problem.
Works well out of the box for me : I have tested the first 3 levels without any problem.
Work out of the box but fullscreen don't work, so I prefer to use the tweak PROTON_USE_WINED3D.
For me, game start and work fine only with PROTON_NO_D3D11 or PROTON_USE_WINED3D.
Lot of problems
"Game Configuration" doesn't work so fullscreen mode isn't possible. I haven't tried the tips suggested on the other reports.
Works like Cobi Treasure Deluxe : "Alt+Enter" for windowed mode -> "Alt+F4" for kill the game -> restart the game. After that, game is playable on a 800*600 window.
40Hz+40FPS
Just finished the game without problem
Don't start at all for me, I have tested all tweaks but none are working.
Don't work
Native version don't work, I also tried all Proton tweaks but nothing works.
"Insufficient video memory detected. A minimum of 32 MB of free video memory required."
I just finished the game, it works perfectly on ultra settings (without SSAA antialiasing, performances are realy poor with it). More than 60 fps
Don't start without tweaks. Best performances with PROTON_NO_D3D11
Proton-6.1-GE-2 GloriousEggroll
When the game starts, desktop resolution change
I tested the native version and proton without success, only starts with proton-ge.
Game start on a white screen. To fix this, switch between virtual desktops (with "ctrl"+left/right arrow for example) and the game start correctly. Thanks to Matoking for this tip !
I finished the game without any problem, constant 60 FPS.
Played ~10 hours with Proton and ~10 hours with Proton-GE (Proton-5.9-GE-8-ST)
With Proton-GE, the "virtual desktop switch" fix is not necessary.
Works great out of the box, tested with xbox360 controller. (but you have to force fullscreen in config every time you start the game)
Works well
I can confirm the "hidden folder problem". With an other SteamLibrary path, the game works well.
Don't start without tweaks, black screen with PROTON_NO_D3D11 or PROTON_USE_WINED3D
Work perfectly. There is indeed only one problem: impossible to stop the game properly.
Don't start at all for me, I have tested all tweaks but none are working.
PROTON_USE_WINED3D=1 %command%
Game crash at launch without wined3d for me. After that, it works fine.
WINEDLLOVERRIDES="xaudio2_7=n,b" PULSE_LATENCY_MSEC=90 %command%
The prefix tweak is mendatory to avoid sound problems.
Here is how I proceeded to mod my game :
- Download SKSE here, extract the files and move it in
~/.local/share/Steam/steamapps/common/Skyrim\ Special\ Edition
.
Rename
SkyrimSELaucher.exe
toSkyrimSELaucher.exe.bak
andskse64_loader.exe
toSkyrimSELaucher.exe
.With Lutris, install Vortex Mod Manager (VMM) and start it. The application will scan your disk and should automatically find the installation folder of Skyrim SE.
That's it. To find the mod files, use the Nexus website ; if you have an account on it, you can even use the
MOD MANAGER DOWNLOAD
button on each mod webpage to automate the download and the installation of the mod in VMM.
Endnote :
- I manually installed SKSE because its installation with VMM doesn't seem to work.
- Don't use the "official mod menu" integrated in Skyrim SE.
- I personally use ~40 mods and I haven't encountered any problem if the mods order is respected.
- I was inspired by this tutorial, thank you "LinuxLoverForever" ;)
Works perfectly well
Unlike other reports, the game works like a charm for me. A recent version of Proton has probably corrected the problems.
- Constant 120+ fps
- xbox360 controller works well
Works perfectly with Proton
The native version don't work but thanks to Proton I could finish the game without any issues.
Seems to work perfectly now, game don't crash anymore after "Pendulo Studios" logo for me !
Game runs perfectly after disabling Uplay overlay : right clic on uplay icon (on systray) -> Settings -> uncheck "enable in-game overlay for supported games"
Native version don't work, perfect with Proton
Entirely played with the unofficial french patch, works perfectly !
Don't start at all for me, I have tested all tweaks but none are working.
Black screen with default Proton, use Proton Experimental or GE-Proton and the game works perfectly !
Works
First cutscene don't works.
I just finished the game without problem. In-game voice chat don't seem to be working.
Works well
On first start cursor is invisible : you have to enable "system cursor" in the option menu.
Don't work
I tested the native vesion, proton and proton-ge, nothing works.
Use the explanation in the previous report
Game works well after tweak
Works well
Linux version works but I think it's not the last build. Windows version works perfectly well with Proton.