belse.bubba
Published
PROTON_ENABLE_NVAPI=1 DXVK_ENABLE_NVAPI=1 VKD3D_CONFIG=dxr,dxr11 PROTON_HIDE_NVIDIA_GPU=0 %command% --skip-launcher
It will halt to launcher menu and also first start i have to start it with proton 7 because if you start it with proton 8 it wont start at all but halt to install process I think this is some kind flaw with proton 8 After initial start you can change to proton 8 and everything is worked for now on
Works great with Steam index system and only problem is that audio crackling but its easy to correct
Sometimes audio is crackling but if i start first alyx that will correct problem
When level starts there is a few second lag
Could't connect Shift when i was using proton 5.xx after i changed to 4.xx it started working
I did Mf-install and it still did'nt work i got it working with previous system but not now
When level starts there is few second lag
Game crashes quite often and every time there is same error message in log file LowLevelFatalError [File:Unknown] [Line: 312] Direct3DDevice->CreateTexture2D(TextureDesc,SubResourceData,OutTexture2D) failed at t:\OAK-PATCHWIN641-WIN64\main\Engine\Source\Runtime\Windows\D3D11RHI\Private\D3D11Texture.cpp:601 with error E_INVALIDARG, Size=8192x8192x1 Format=(0x00000061), NumMips=14, Flags=D3D11_BIND_SHADER_RESOURCE
Game is great to play but without ability save your progress its not fun to play
Game doesnt save your progress Commando 2 and 3 dont save and X saves but it lost when you close down
Works well and few crashes doesnt affect that much
Crashed few times
First tried with Nvidia 4.50 drivers and got only black screen Upgraded 4.55 and now everything works fine
Crashed few times
Its quite hard to play when you cannot see but its for only one mission what i can tell
At Heist mission all screen turns blacks all of sudden and it comes back when you get to the elevator only hud shows and game still runs all good and you can use scanner to see
Crashed few times
Screen capture at Heist NPC only shows because i marked those with scanner
After putting user.ini file to cyberpunk config folder game come rock solid and havent crashed also proton 5.13-5 fixed missing sound
Ez optimizer https://pastebin.com/THAmqbsA
At heist mission in konepeki plaza and no tell motel screen goes black https://www.youtube.com/watch?v=Ac8s41e0I7Y
Works great out of the box
Sometimes slight slowness
Works fine and mild stutter doesnt affect gameplay
occasionally mild stutter
when you first start map it sometimes freezes few seconds and then runs smoothly when you have played couple of minutes games runs without any freezes
Works out of the box
Works fine but only offline Gives connection error when you try to log in
Cant play because it lags too much in fight
Game is unplayable Framerate drops significatly in fight And this is quite hilarious because my older computer can run this game with ease intel I5 7500 nvidia 1070 and older nvidia 4.70 drivers
Older computer runs better
Works great with max graphics
Fighting was impossible because of lag but disabling overlay fixed that
In fight games slows down so much that gaming is impossible but when you disable Steam overlay in game that cures the problem
Works right out the box
Also VR works great Used Steam index and no problems
Works great and runs smooth
Vr Index didnt work It doesnt draw screen to goggles but only shows it on the monitor
You cant play because you cant interact with objects
Triggers dont work so you cant grap or interact
Used Steam index and everything else worked fine except that input
Works right out of the box
Sometimes game freezes
Everything has worked and only small crashes
Campaign doesnt work but everything else is working fine
I tried proton 8.05 and experimental and they didnt work because it hangs at the begining giving you black screen after logos
Worked fine but new update breaks the game
Was working fine with steam index but new update breaks the game Game screen only draws to monitor and headset stays blank
Worked first but 1.2 patch broke mouse buttons
Mouse stopped working
First game was running fine and everything worked great But today i got 1.2 update and it broke mouse controller and mouse button doesnt work any more Game now only works with gamepad
Works like a charm
1.2 version broke mouse controller but 1.31 version fixed that and now everything works
PROTON_ENABLE_NVAPI=1 DXVK_ENABLE_NVAPI=1 VKD3D_CONFIG=dxr,dxr11 PROTON_HIDE_NVIDIA_GPU=0 %command% -dx11
Works fine but sometimes little lag but not really severe
force_vk_vendor=-1 DXVK_CONFIG="dxgi.customVendorId = 10de" %command%
Didnt work from straight but after adding launch option it worked with no problem
Works great with ubuntu 24.04
Works right out of the box with fresh ubuntu 24.04 It didnt work with ubuntu 20.04 and nvidia 5.35 drivers
Only black screen
Not working i only got black screen i tried Nvidia 5.25 and 5.35 drivers neither one worked
I it doesnt start with proton 8 for me When i switched proton 7 everything has worked
Gives error message "dx11 feature level 10.0 is required to run the engine" Using PROTON_USE_WINED3D11=1 %command% you can start game but game gives you graphics errors
Not working
Tried many
Tried Proton 7, 8 and experimental non has worked Proton 7 starts with black screen but doesnt give anything else Proton 8 gives dx12 error and experimental proton dont even start
PROTON_ENABLE_NVAPI=1 %command%
Proton 8 starts but doesnt give you any screen Proton 7 starts in black screen and first start takes quite time but when it starts it works
Works right out the box
No problems none whatsoever
Openxcom is great for this. Just download files from project webpages and then extract files to main folder and rename XCOM folder to UFO and rename openxcomex.exe to dosbox.exe and your good to go
