
No Problem
Anzeige lässt nicht nicht über 60HZ einstellen
Wollte nicht auf meine HDD mit NTFS formartierung starten. Benchmark 287.45FPS (WIndows 315.96FPS)

30 FPS cap, 5 watts cap
Works absolutely brilliantly out of the box, with zero tweaks, both on Deck and my Arch desktop.
Performance on the Deck is passable, 30 FPS locked with 5 W power. No stutters, artifacts or anything of this sort. Settings are set to medium with native res.

I just had to install and launch the game and for several months it just worked. But recently I had to change the proton version to 7.0.6 because it won't launch otherwise. After the change I haven't had any issues whatsoever.
I didn't have to do anything beside enabling support for any game to be ran via proton. It worked out of the box right after the installation- funny thing is that when using maximum antialiasing game doesn't glitch as it does on windows platform :)
Changed the screen refreshrate to 40hz and framrate lock to 40fps
Just changed around some graphics settings, but it really wasn't necessary
Runs amazingly well on the Deck by default. I really can't see why it is classified as unplayable.
Game works fine.
Caused graphical glitch on other monitor
Steam Input not supported so had to use an Xbox controller and force disable Steam Input
When racing, shadows glitches appears frequently, the main problem is that the game is very unstable and crashes/freezes constantly.
I used the native version, didn't use any launch options
Works well with ESYNC disabled
Ingame overlay causes game to freeze visually.
Works beautifully with ESYNC disabled.
Works perfectly out of the box.

The game requires a little bit of tinkering in the form of the two launch option specified in the game's properties menu.
PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1
These two launch options allow the game to be run perfectly. Without these options, the game will crash after displaying the first splash screen.
Works great out of the box, except for a bit of screen flickering
I had a bit of annoying screen flickering that was remedied by turning on vsync in the graphical settings of the game.
Missing in-game audio is a deal breaker
Videos play but in-game menus and sound effects are missing.
Unable to install openal as .../system32/openal.dll is "in use". Not even Rapture3D install works.
Works flawlessly with proton 6.3.7
Works like native with save games synced correctly

Craps out after opening the game window.
This happens on Windows as well, will investigate further
game shows black screen and crashes on startup when using DX11
Played for 15 minutes, worked perfectly, saves were synced, 330-350fps max settings.
Game runs good. At highest settings on my system I was able to run at around 135-150fps which made for an extremely fluid experience.
Needs PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1 %command% to start at all.
Works with Proton 3.16-9
Runs well after changing proton version to 3.16-9
Feels like native... Oh yeah.
Needs a very easy patch, other than that runs flawlessly.
Game starts to stutter after a few hours, Feral Gamemode seems to fix this problem.
Runs smooth and is enjoyable!
Music sometimes didn't play
Doesn't work with Proton 5.13. You have to manually set it to use Proton 5.0-10
Add PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1 %command% to launch options. No problem with shadows with latest proton 5.9-GE-8-ST. Sometimes have problems with audio
Works perfectly out of the box
Alt tabbing is a bit wonky but you can sorta make it work with enough insistance. I don't quite remember the game having this problem on Windows, but it's possible it was like that there too.
Started with just a black screen. Everything work with this launch option: PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1 %command%
Sometimes it just won't open and will stay on the black screen, but besides this the experience is godlike. With my pretty low-end setup I can easily pull off at least 60 fps on high settings.
Shadows have to be set to lowest setting, otherwise they produce artifacts.
Ran fine on dxvk for 48 races, then became very unstable. switching to PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1 %command%
resolved those issues but still crashing occasionally (can't rule out a cpu issue on my machine though)
custom proton 5.8-GE-2-MF

5.6-GE-2 GloriousEggroll
fixed by adding PULSE_LATENCY_MSEC=30
fixed by enabling D9VK
Had some slight problems with frame rate. When the game is closed you have to relog to play again
steering wheel crashed the game
game lagged a bit, not much tho. Could play without much problems
I had to use this to launch the game:
PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1 %command%
PROTON_NO_ESYNC=1
was necessary because the game wouldn't launch if I had a USB gamepad plugged in (without the gamepad it seemed to launch fine).
PROTON_NO_D3D11=1
resolved significant regular graphical slowdowns during races which were a bit nauseating.