PlayableShow Details
Unknown
I get an Error when trying to play the Demo: EasyAntiCheat Error: Failed to create IGameClient instance! Then it closes.
Not playable. So i don't consider buying it.
Low settings
stutter doing gameplay sometimes
Runs out of the box! Install and play!
Game is performing really great!
DLSS not available
I had to use the Easy AntiCheat file from Apex Legends.
After dropping in the EAC file from Apex Legends, the game worked pretty much flawlessly. I am not using any launch parameters. I ran DX12. I played through the entire campaign with some buddies. They were both on Windows and Linux.
Aucun problème sauf un seul crash au bout d'une heure de jeu. Depuis aucun problème dans la version DX12.
Un seul crash au bout de 1h de jeu. Plus rien depuis
Aucun problème sauf un seul crash au bout d'une heure de jeu. Depuis aucun problème dans la version DX12.
DXVK_ASYNC=1 DXVK_HUD=compiler gamemoderun %command%
EAC has been removed with the Wordslayer DLC. Works flawlessly now.
Using GE-Proton7-43 with DXVX_ASYNC=1 gives me 60-140 FPS on Ultra settings (depending on the map and nr. of enemies) and is completely free of stuttering so far. On a single occasion, the game froze for a few seconds during a heavy fight. Other than that, it runs perfectly.
I just clicked play
DXVK_ASYNC=1 PROTON_HIDE_NVIDIA_GPU=0 PROTON_ENABLE_NVAPI=1 gamemoderun %command%
Game works great. Good performance with DLSS, online is superb, no crashes. As always first time playing some maps cause sttuter while the shader cache is building, but after that no more issues.
DX12 Very rare, DX11 some dialogues has cut
DX12 burm gpu, DX11 have FPS-drop after every loading
one crush in the vehicle appearance panel
sometimes transitions to another location has not appear or the GPS dont show way to them
DX12 is great but I prefer DX11 (little FPS-drops but GPU are cooler)
The game was fully playable with minimal issues.
Game would crash after about an hour. Adjusting graphics settings in game menus corrected the issue.
Several of the cut scenes would only display a black screen with audio playing normally.
Launch with DX11 option and adjust your graphics settings to match your monitors recommended settings for things like the refresh rate.
-force -dx11
Set ingame graphics to medium. Set refresh rate and FPS limit in steam deck menu to 40.
It also runs fine without setting any launch options. The game will default to dx12. You can try both options and see which you prefer.
-force -dx11
Set ingame graphics to medium. Set refresh rate and FPS limit in steam deck menu to 40.
It also runs fine without setting any launch options. The game will default to dx12. You can try both options and see which you prefer.
gamemoderun %command%
They deleted EAC requirement. Make sure to delete the EAC folder on the game install location (SteamLibrary/steamapps/common/OUTRIDERS/) and make sure to delete the prefix/proton folder (680420) aswell to evade any issues (SteamLibrary/steamapps/compatdata/). Both are found on the disk/mnt/media where you installed the game at.
PROTON_HIDE_NVIDIA_GPU=0 PROTON_ENABLE_NVAPI=1 gamemoderun %command%
Runs and looks better with DLSS enabled, dx11.
I could never start Outriders after following the tutorial. What in the end worked for me was copying the eac file, and removing the launch options. It only works with no launch options on my pc.
Added the Apex Legend AC
stutters, freezes, (mainly to particles), whenever map loads, (shaders) but after a goodwhile you do not notice them
stutter, map loading, cutscenes not appearing, out ofsync, voice lines over eachother
enabled cross-play, someone from the outriders discord came to assist me, i noticed more laggy/choppy graphics compared to me playing solo
The game runs fine, just add the AC EAC from Apex Legends, I did notice whenever i added a launch options to the game, it would not start, i just ran GE-Proton7-20 without options and it worked fine.
FYI, you the game does launch and you see a black screen, close it and reopen, give it 3 or 4x and it works after that, sometimes you may wanna verify the game.
Add the AC, and you're good to go!
DXVK_ASYNC=1 gamemoderun %command%
I copied a EAC .so file into the EasyAntiCheat folder.
Black screen on startup
copied Apex legends anti cheat file
Tried all below recomendations to no avail.
I followed the same EasyAntiCheat hack as other posters:
- Install Apex Legends
- Copy easyanticheat_x64.so provided by Apex Legends into Outriders cp /steamapps/common/Apex Legends/easyanticheat_x64.so /steamapps/common/OUTRIDERS/EasyAntiCheat/
I didn't need to modify the launch options but it didn't break anything when I did add it
Randomly the cutscenes will start while playing audio and only showing subtitles on a black screen. The video will start after a few seconds or when a new custscene is loaded
No major issues when applying the hack to enable EasyAntiCheat on linux. This could break at anytime depending on the level of effort/indifference by Square Enix
DXVK_ASYNC=1 gamemoderun %command%
Copied Easy Anti Cheat file from Apex Legends install
used launch option from other reports and EAC file from Apex. deleted file for intro videos, not sure if it actually starts all that much faster without them. runs great on medium
copy easyanticheat_x64.so from apex legends
i'm not using any launch options.
If you don't have Apex Legends and don't want to download ~50gb, to get "easyanticheat_x64.so", you can use file in description of this video https://www.youtube.com/watch?v=-6eBNKHy4fI&t=1s
If you get error about loading "EasyAntiCheat_x64.dll", then you have to start download of Apex Legends, download only first 2 downloads ~1.9gb and ~500mb then pause it. Start outriders, it should load. Now you can uninstall Apex.
Mainly I play on medium graphics settings because I like silence, but here even the low settings do not give much
Frome ,,Apex Legends'' I copied the file ,,easyanticheat_x64.so'' to the ,,EasyAntiCheat'' folder in OUTRIDER's files (thenks Linux Viking)
no matter the graphic settings, the graphics card is always on 100%, GPU temp ~70 and howling fans
Mainly I play on medium graphics settings because I like silence, but here even the low settings do not give much, but the graphics are fine and smoothness are good
The game works after pasting Apex Legends's .so anticheat file into the anticheat folder of Outriders.
DXVK_ASYNC=1
Sometime the voices aren't in sync with the character's lips
Slight input lag, not too bad totally playable
Stutter a bit even with GE Proton and DXVK_ASYNC=1.
The game sometimes crashes on startup but works most of the time. Was able to run the game with dx12 once but it crashes when I try to run it with it most of the time, not recommended with it anyway.
DXVK_ASYNC=1 gamemoderun %command%
Video Guide: https://youtu.be/-6eBNKHy4fI
50 FPS Cap, Medium game settings
Don't use DX12
Either get the file from Apex or use the one from the video, the folder is an extra level down to the other users, needs to be in the Easy Anti Cheat directory, use the video for full guidance
gamemoderun MANGOHUD=0 __GL_THREADED_OPTIMIZATIONS=1 __GL_SHADER_DISK_CACHE=1 __GL_SHADER_DISK_CACHE_PATH=/mnt/Data/Cache/outriders/ %command%
the game lags a bit on initial loading of the world, but runs smooth after that
downloaded Apex Legends through Steam just to get the easyanticheat_x64.so file and put it in OUTRIDER's EasyAntiCheat directory
DXVK_ASYNC=1 gamemoderun %command%
I did as the other reports mentioned and downloaded Apex Legends through Steam just to get the easyanticheat_x64.so file and put it in OUTRIDER's EasyAntiCheat directory.
After placing that EAC file there, the game got past the initial main menu.
The game is playable, however, cinematic's that seem to play pre-rendered videos don't play at all for me, and instead just display a black screen with subtitles and audio playing, no video. Hopefully a solution for this is found.
DXVK_ASYNC=1 gamemoderun
Some wonky cloth geometry that I don't recall happening on Windows.
Followed advice here to swap Apex Legend's easyanticheat_x64.so file into Outrider's install dir to get the game past the server login. Then used DXVK_ASYNC=1 to get rid of the caching stutters. Runs very smooth after that
Copied easyanticheat_x64.so from an apex install, had to run outriders in dx11
Well keep in mind it will stutter due to shader compilation. But the more people play the better it gets.
Download Apex Legends. Copy the easyanticheat_x64.so file found in the game folder and place it into Outriders. The game will get past the server login as one already stated. Worked for me on first try.
Try a few restarts if it fails.
Shaders are yet to be community compiled.
